Fitting panels butted up to the edge of tiles
The dimensions of my shower enclosure: three walls, two at 800mm, one at 1303mm, height 2305mm.
I have had leaks at the bottom of tiles which has let water creep over the edge of the tray and down on to the ceiling below. Have taken tiles off up to 1000mm on all three walls from the top edge of the tray. The thickness of the tiles are 100mm. Is it viable to fit the panels horizontal and butted up to the edge of the tiles left on the walls? or would I have to remove all the tiles up to the ceiling?
Written By DanHello there, thank you for getting in touch. There's no reason why you can't do as you describe â€“ the panels can be mounted vertically or horizontally. The panels are 2400mm x 1000mm x 10mm thick so it would depend on the thickness of your tiles how you would join them to your existing tiles.