How to install wet wall panels

Installing wet wall panels is a relatively straightforward process that can be done by anyone with some basic DIY skills. Wet wall panels are a popular choice for bathrooms and shower enclosures because they are easy to clean and maintain, and can give your bathroom a modern and stylish look.

Here’s a step-by-step guide on how to install wet wall panels:

  1. Measure the area where you want to install the wet wall panels. This will give you an idea of how many panels you’ll need, and what size they should be.
  2. Remove any old tiles or wallpaper from the wall. If the wall is uneven, you may need to level it with plaster or filler.
  3. Cut the wet wall panels to size using a saw. You may need to cut holes for any pipes or fixtures that are in the way.
  4. Apply a layer of adhesive to the back of the first panel using a trowel. Make sure the adhesive is evenly spread across the entire panel.
  5. Place the panel on the wall and press it firmly in place. Use a spirit level to make sure it is straight.
  6. Repeat the process with the remaining panels, making sure they are butted up tightly against each other.
  7. Once all the panels are in place, use a silicone sealant to fill any gaps between the panels and the floor, ceiling, or any fixtures.
  8. Finally, use a trim or edging to finish off the edges of the panels. This will give your installation a professional and polished look.

When installing wet wall panels, it’s important to follow the manufacturer’s instructions carefully. Make sure you use the recommended adhesive and sealant, and don’t cut corners when it comes to measuring and cutting the panels. With a little patience and attention to detail, you can have a beautiful and functional bathroom or shower enclosure in no time!

взять кредитзайм онлайн на карту